ICIMACS for DANDICAM: The IC Initialization File ANDICCD.INI

7/23/98 : JAM

(ICIMACS = Instrument Control and Image Acquisition System


On startup, the IC program loads its defaults and saved values from the initialization file ANDICCD.INI. The operation of the program can be changed in both trivial and profound ways by changing the values in the ANDICCD.INI file.

The hash or pound sign "#" is the remark character; any line beginning with the remark character is ignored by the IC on startup.


# This is the initialization file for the Andycam CCD
# 09/15/97 - JAM

# Disk Hardware Configuration
DISKPRESENT=T
DISKENABLE=T

# Bus Handshaking Parameters
HANDSHAKING=F
HANDSHAKEPORT= 1

# Sequencer Hardware Configuration
SEQUENCERPRESENT=T
SEQUENCERENABLE=T

# Operation Mode Settings
TESTMODE=F
TIMING=F
BURSTENABLE=T
TCENABLE=T
LOGENABLE=F # Log communication to log file?
IEENABLE=T

# Variables saved from last session
POSTBIAS= 0
EXPOSURETIME= 0
DISPLAYMIN= 0
DISPLAYMAX= 100
DISPLAYSAT= 65535
POSTCLEAN= 1
PCDELAY= 0.0
PCPAUSE= 0.0
CBBAGAIN=0
PA_TAU=0
IMGTYPE=OBJECT
OBJECT=after seq idle test added
OBSERVER=DePoy & Pogge
FILENAME=test
EXPNUM= 20
LASTFILE=C:\ba.010
NEXTFILE=C:\ba.010
UNIQUENAME=980513AC.00t
INITMOUNT=UNIX:\CB\/data/observer # last mount point for fits file writes saved
BRUCE=F # Display type
FLASH= 0
GAINDL= 32
PA_TAU=0
CBBAGAIN=0
DATAXBIN= 1
DATAYBIN= 1
CLEAN= 0
CLEANXBIN= 8
CLEANYBIN= 8
POSTCLEAN= 1
PCPAUSE= 0.0
PCDELAY= 0.0
POSTCLEANXBIN= 8
POSTCLEANYBIN= 8
OVERX= 0
OVERY= 0
ZOOMCEN= 1024, 1024
STATS=-FULL -ZOOM +USER 1 1 1 1
VERBOSE

Imaging Sciences Laboratory
Revised: July 23, 1998 [jam]