ICIMACS for DANDICAM: WC Ethernet Network Drivers
7/23/98 : JAM
(ICIMACS = Instrument Control and Image
The DANDICAM ICIMACS WC installation includes a network connection for command communication only.
The PCNFS connection is no longer officially supported due to memory constraints, and
the proven reliability and higher performance of the caliban data connection.
The WC network interface can be divided into two parts:
- 1)The packet driver
- The standard 3com packet driver for the 3C900 PCI ethernet card,
The packet driver 3c90xpd.com must be loaded in the autoexec.bat file
before any of the other network drivers. The packet driver can be found
either in the root directory, in the 3C900\pktdvr directory, or in the pktdvr
directory on the ethernet card setup floppies. The packet
interrupt number must be specified on the command line; 0x60 is the preferred
- 2)The telnet session driver
- Watterloo University's tcpport.exe, part of the WATTCP suite, maps a TCP
telnet connection to a virtual serial port available to the WC software.
Imaging Sciences Laboratory
Revised: July 23, 1998 [jam]