Generic ICIMACS: WC CMOS Setup

11/24/97 : JAM

(ICIMACS = Instrument Control and Image Acquisition System


The CMOS settings on the WC are not critical, since the WC does not perform any time-critical tasks. Therefore, it is safest to use the default CMOS settings. It should also be ok to use the same settings as on the IC, which are listed below.
Note that the motherboard manual includes directions for the wrong BIOS; this an error by the motherboard manufacturer. Follow the onscreen instructions to examine or change CMOS settings.

CPU Internal Cache
Enabled
External cache
Enabled
Video BIOS Shadow
Enabled
Auto-Configuration
Disable
AT Bus Clock
1/4 CLKIN
DRAM Speed
Faster
Cache Burst Read
2T
Cache Write Cycle
3T
DRAM Write Burst
Enable
Hidden Refresh
Enable
External Cache WB/WT
Write Back
System Shadow
Cacheable
Video Shadow
Cacheable

Imaging Sciences Laboratory
Revised: November 24, 1997 [jam]