Generic ICIMACS: WC SCSI Controllers Setup

11/24/97 : JAM

(ICIMACS = Instrument Control and Image Acquisition System


The following hardware settings to the WC SCSI controllers have been tested to assure compatibility with the workstation computer hardware and software. Settings not mentioned here should be left in their factory default settings. Follow the onscreen instructions to examine or change controller settings.
I/O Port Addresses:
150h,190h
Hardware IRQs
11,10
Host SCSI IDs
6,6
VESA Burst Mode
Disabled
BIOS Address
DC00
Synchronous Transfer Rate
5 Mb/sec

NOTE: In order to work correctly, the BIOS on one of the controllers must be disabled. If disaster strikes and you can't get the SCSI setup screens to pop up, find or beg for a copy of the Advansys setup floppy, which will reenable the cards, auto-configure them, and include a test suite of the hardware.
Imaging Sciences Laboratory
Revised: November 24, 1997 [jam]