ICIMACS for OSIRIS: The IC Initialization File OSIRIS.INI

7/22/99 : JAM

(ICIMACS = Instrument Control and Image Acquisition System


On startup, the IC program loads its defaults and saved values from the initialization file OSIRIS.INI. The operation of the program can be changed in both trivial and profound ways by changing the values in the OSIRIS.INI file.

The hash or pound sign "#" is the remark character; any line beginning with the remark character is ignored by the IC on startup.


# This is the initialization file for Andicam IR array
# 09/15/97 - JAM

# Disk Hardware Configuration
DISKPRESENT=F
DISKENABLE=T

# Bus Handshaking Parameters
HANDSHAKING=F
HANDSHAKEPORT= 1

# Sequencer Hardware Configuration
SEQUENCERPRESENT=F
SEQUENCERENABLE=T

# Operation Mode Settings
TESTMODE=F
TIMING=F
BURSTENABLE=F
TCENABLE=F
LOGENABLE=F # Log communication to log file?
IEENABLE=T

# Variables saved from last session
POSTBIAS= 400
EXPOSURETIME= 0
DISPLAYMIN= 0
DISPLAYMAX= 100
DISPLAYSAT= 65535
GLOBALRESET= 1
GLOBALRESETCLAMP= 0
LINERESET= 1
LINERESETCLAMP= 0
EXPOSURECLAMP= 0
SCSU=LATE
CLEAN= 0
POSTCLEAN= 0
CPAUSE= 0.0
CDELAY= 0.0
PCPAUSE= 0.0
PCDELAY= 0.0
GRPAUSE= 1.0
GRDELAY= 0.0
IMGTYPE=OBJECT
OBJECT=OBJECT
EXPNUM= 0
UNIQUENAME=980513AI.000
PROPID=
INITMOUNT=DOS:\IR\A: # last mount point for fits file writes saved
BRUCE=F # Display type

Imaging Sciences Laboratory
Revised: July 22, 1999 [jam]