skip navigation
Saturn from Cassini Astronomy 161:
An Introduction to Solar System Astronomy
Prof. Richard Pogge, MTWThF 2:30pm

Setup your Clicker

When you get your clicker, there is a one-time setup step you need to perform to get it to connect to the computer in MP1000.

Our classroom computer expects the clickers to be set for Channel 41. To set the channel for your clicker do the following:

  1. Press and release the GO button.
  2. While the light is flashing red and green enter 4 and 1 to set "channel 41".
  3. Press and release the GO button.
  4. When you get to the classroom next and the computer in the classroom is setup to receive commands, press the 1/A button. The light on your clicker should flash yellow to confirm connection with the receiver.
If no receiver is present, or the channel is set wrong, the clicker will flash red/yellow 8 times, then give up and flash red.

If you have any problems, see the professor before or after class for assitance.

Return to [ Clicker Page | Astronomy 161 Main Page ]

Updated: 2007 September 21 [rwp]